Reset the maintenance required light in a Toyota after you change your oil so you know when to do your next oil change. This process works on most Toyotas including Camry, Tacoma, Corolla, Avalon, Tundra, Sienna, Rav4, 4Runner, and many more.
Step 1: Turn the car to the "run" position and make sure the odometer is showing (some Toyota's need to be on "Trip A"
Step 2: Hold down the "reset trip" button and shut the car off.
Step 3: Keep holding the "reset trip" button and turn the key to the "run" position.
Step 4: Wait for the "Reset maintenance required" light to shut off and then you are done.
**If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday**
-Website: https://www.ChrisFixed.com
-Facebook: https://www.facebook.com/chrisfix8
-Twitter: https://twitter.com/ChrisFixed
-Instagram: https://instagram.com/chrisfixit
-Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7
-YouTube Channel: https://www.youtube.com/ChrisFix
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.