Want Bright Back Up Lights? Rig up your auxiliary lights to come on when you go in reverse. I show you the step by step process of how I wired my truck with a relay so when I put the truck in reverse, the LED reverse lights come on with the stock reverse lights.
Where to get the lights I used: http://www.amazon.com/gp/product/B00GGOEH5I/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00GGOEH5I&linkCode=as2&tag=chri0e2-20&linkId=65QV6WTIPSXEQWV5
Where to get the relay I used: http://www.amazon.com/gp/product/B00C0SATHE/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00C0SATHE&linkCode=as2&tag=chri0e2-20&linkId=V7CJK67FFNV5235B
Automatic Wire Stripper: http://www.amazon.com/gp/product/B000IYTCG6/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000IYTCG6&linkCode=as2&tag=chri0e2-20&linkId=IB2375WQHGF3DP2U
Baja Designs Squadron XL LED Light Review: https://www.youtube.com/watch?v=f1yaj00AnUU
How a Relay Works:
COMING SOON!
How to Wire Truck Bed Lights:
COMING SOON!
**If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday**
-Website: https://www.ChrisFixed.com
-Facebook: https://www.facebook.com/chrisfix8
-Twitter: https://twitter.com/ChrisFixed
-Instagram: https://instagram.com/chrisfixit
-Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7
-YouTube Channel: https://www.youtube.com/ChrisFix
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

11 thoughts on “How to install auxiliary reverse lights”
  1. Avataaar/Circle Created with python_avatars tutacat says:

    Why the stock lights for reversing are so dim

  2. Avataaar/Circle Created with python_avatars AnotherbádRep says:

    Can I use this video as a guide to run new reverse light wires for my 2011 Ford crown Victoria police interceptor?

  3. Avataaar/Circle Created with python_avatars Alex Reinhard says:

    Great video! Appreciate the help on how to wire a relay as well!

  4. Avataaar/Circle Created with python_avatars Tommy Nguyen says:

    7th bb8

  5. Avataaar/Circle Created with python_avatars JESTR says:

    knowing me, i would accidentally put the wrong wire in the wrong hole, so how would you back it out to reinsert it to the correct spot ?

  6. Avataaar/Circle Created with python_avatars yurisodrebjj says:

    Chris Fix is the best out there! Love from Brazil!
    Ford Ranger 2010 owner*

  7. Avataaar/Circle Created with python_avatars Marty WOOD says:

    i blob liquid electric tape over all openings to make sure no water enters

  8. Avataaar/Circle Created with python_avatars Marty WOOD says:

    chrisfix is a bad ass!

  9. Avataaar/Circle Created with python_avatars El COMPA MARTINEZ says:

    329 dollars just for the lights???? No thanks!!!

  10. Avataaar/Circle Created with python_avatars chofyam says:

    Legendary

  11. Avataaar/Circle Created with python_avatars D M says:

    Those contacts at the relay look like they were heat shrink able

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.