Car Horn Doesn't Work? This video will show you how to test and replace a car horn. I show you how to check which horn, high or low, is bad using a multimeter.
Trailblazer Headlights: https://www.youtube.com/watch?v=OMYHemqSQyQ
Trailblazer Brakes: https://www.youtube.com/watch?v=FOk0tkGEWmA
Trailblazer Sway Bar End Links: https://www.youtube.com/watch?v=YqOsW1X1-O8
**If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday**
-Website: https://www.ChrisFixed.com
-Facebook: https://www.facebook.com/chrisfix8
-Twitter: https://twitter.com/ChrisFixed
-Instagram: https://instagram.com/chrisfixit
-Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7
-YouTube Channel: https://www.youtube.com/ChrisFix
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

16 thoughts on “How to fix a car horn”
  1. Avataaar/Circle Created with python_avatars Jerome Harina says:

    Replaced my low tone horn as well.but went for cheap and ended up getting sent another high tone horn(510).still used it as replacement…now they are uniquely annoying.Success!๐Ÿ˜๐Ÿ‘Œ

  2. Avataaar/Circle Created with python_avatars Ted Knight says:

    Thanks Chris. Helpful video as usual.

  3. Avataaar/Circle Created with python_avatars ProJanitor says:

    I have a question for youโ€ฆ my horn works just fine, but it wouldnโ€™t sound until I held the horn down for several seconds. Is it because the horn was clogged with pollen or something? I never use it; I only noticed it stopped working because it stopped sounding when using the key fob to lock my vehicle.

  4. Avataaar/Circle Created with python_avatars John Mano says:

    Hello Chris. I have a '99 Civic whose horn only works sometimes… I hear the relay's clicking noises when I press the buttons on the steering wheel. I bought another horn at a junkyard, thinking it was the horn, but it turned out not to be, as both work hooked up to a battery… What could it be? Help would be appreciated from anyone…

  5. Avataaar/Circle Created with python_avatars Mamoon Bakeer says:

    Great video. Q: I have a 2018 Kia Rio with a single tone horn. I want to remove it and install an aftermarket high+low horn like the one here. Is it safe on the relay, fuse and the alarm system since the dual tone will draw more current and what should I do?. Thank you.

  6. Avataaar/Circle Created with python_avatars IsoNox says:

    Hey can you help my horn wasnโ€™t working at first changed the fuses that didnโ€™t help but it suddenly started to work then it stopped working all of a sudden again I hear the clocks from the relay and everything

  7. Avataaar/Circle Created with python_avatars Emily Diaz says:

    Finally switching mine out after they gone completely lol

  8. Avataaar/Circle Created with python_avatars Kingen Zache says:

    I solved my issue by cleaning the contacts with 5.56, great video as always Chris!

  9. Avataaar/Circle Created with python_avatars trent o says:

    Thanks auto parts for paying for this video

  10. Avataaar/Circle Created with python_avatars 3Crotonlake says:

    the horn i took out of my miata has a single terminal. how do i replace with a 2 terminal horn. i can find a single terminal horn

  11. Avataaar/Circle Created with python_avatars yhamgtt says:

    A good practice before doing a continuity test is to check the multimeter by touching the leads together and verifying a reading of zero ohms.

  12. Avataaar/Circle Created with python_avatars Tyler Stanton says:

    Hey so this isn't necessarily related but I have a 05 gmc envoy that I put an aftermarket steering wheel in and I removed the clockspring thinking that that'd give me the ability to hook up the horn but I haven't had any luck hooking it up do you think you could give me any pointers?

  13. Avataaar/Circle Created with python_avatars ScantPear2004 says:

    Isnโ€™t there a continuity mode built into the meter right?

  14. Avataaar/Circle Created with python_avatars ScantPear2004 says:

    How do we make the horn louder

  15. Avataaar/Circle Created with python_avatars Christopher Petersen says:

    Great video but on my2006 gmc envoy, I donโ€™t see the horn in front of the battery

  16. Avataaar/Circle Created with python_avatars Cole Mitchell says:

    So my horn doesnt work from the steering wheel but when i lock it then it makes a noise, The fuse is fine and the relay clicks when i lock it would replacing the clockspring fix this issue?

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.