LED lights are more efficient than old school incandescent bulbs. LEDs use less battery power, run cooler, and look way better than the original incandescent bulbs so I am replacing all of the lights on my Hummer with new LED bulbs! #Shorts
LED Bulbs for your car: https://amzn.to/3godDHk
Hummer LED Running Lights: https://ebay.us/2iXeBW
LED Bulbs for your car: https://amzn.to/3godDHk
Hummer LED Running Lights: https://ebay.us/2iXeBW
Hey guys chris fix here with a chris fix, quick tip on replacing the side markers on a hummer. This is all old. It's burnt out, it's corroded. It needs to be replaced with a nice brand new led light.
So, let's get to it first, let's unscrew the two screws holding this front cover on good. Then the cover could be removed and check out all this corrosion next grab a wrench and put it on the nut behind the light and use a phillips head screwdriver to hold the screw in place as you remove the nut repeat, the process for the other screws And this screw head is filled with rust, so use a pick to clean it out that way we don't script the screw head by accident. Now the screwdriver fits in there all the way so finish, removing the last two screws and then out with the old, broken rusted light and in with the new led light now to hold this in i'm using stainless steel screws. So we don't have any corrosion problems at all, so tighten down all four screws good and then the cover could go on and tighten those two screws down and finally add a little silicone paste to the connector to make it waterproof and that's a chris fix, quick Tip.
I just watch his videos because I like to learn I don't even have cars I'm only 10 and interested 😐😐
"Hey guys…" is back to 2018 level enthusiasm
Perfect
Hey guys! Quick tip here and today I’m gonna show you a few Chris Fixes
Would love a video showing how to change incandescent to LED and keep to exterior light fault light off
And the reality is that new light may last longer than couple of original bulbs, but then you need to replace the whole light instead of just a bulb? For a cold country and winter those led lights are just overhyped. Can't even see those under a snow. Should not be a thing in cold countries.
I put in LED bulbs for the brake lights and now they work but I am getting trouble light on dash because car pre-check does not recognize them being there. They make a resistor you have to put in so the computer will see them and not give a warning light.
Are you ready for the second coming of Jesus Christ? Will you be innocent before God's judgement?
Jesus died for our sins so we can escape hell, and then God raised Him from the dead 3 days later and Jesus is now in heaven waiting to come back to earth on an hour we dont expect to gather up the souls who believed and accepted him and judge those who didnt. And because of that, Jesus is the only one who can save us. I plead and beg you to make Jesus Christ your Lord and Savior today! Not in a few minutes, not tomorrow, right now! You must make this dicision right now.
If you want to become saved, you must believe that Jesus died on the cross for you, was rosin by God 3 days later and is now coming back some day to bring us to heaven. Repent of your sins and try your best to live a holy life for God.
Some youtube channels i reccomend are:
DLM Christian Lifestyle
Off the Kirb Ministries
If you read to this far, i want to thank you! And so, have you made Jesus your Lord and savior?
Good idea picking the rusty screw befor hand, lol that's my problem I see
You don't have videos about how to change timing chain or belt, that would be a good idea for next new videos.
Cheers from 🇨🇦
I don't think I've appreciated just how lucky I am to live in a state that really has no rust issues cause everything would be like 10x harder 😅
there are 6 screws just for one small optional light? 😂 talking about overengineering
What l have to do to don't have your videos in my suggestions?
Never change your stuff over to led!!! It’s a damn terrible idea it’s not made for it and it is way hotter!!!!!
Remember to check the blinker fluid. If you have run out just ask your wife to go buy some. Great fun.
you forgot the locktight and the epoxy backing for the housing. that shit is going to fall off…
Should have added anti seize on the screws if you're using stainless nuts