Hey guys chris fix here and today, i'm going to show you how to make a door pull for your race car we're not going to be using my keychain, because you can see already it's tearing this isn't safe enough. So what we're going to be using is a metal wire like this, with a plastic sleeve that way it's safe. If it catches fire the car, you don't have to worry about this disintegrating. The metal wire will always be there.

It's a nice big loop and easy and safe to pull so first we're going to take our wire and slip it through this little slot here so that we can make a good connection and you can see the ends of the wire. Don't have any plastic sheathing! Now you want to get your proper size crimp and get that in like that and finally get your crimpers and you want to find the right size, crimper spot like that, right there and just crimp down nice and hard. And finally, because this is sharp at the end - let's add a little bit of heat shrink to the end, and now it won't scratch up the door panel and cut you all right. Let's try it out beautiful and that's a chris fix, quick tip.