Learn how to fix a door that wont lock or unlock by replacing a door lock actuator.
#shorts

17 thoughts on “Fix a door that won t lock or unlock”
  1. Avataaar/Circle Created with python_avatars Abhi K says:

    I've had some rust near door drain hole in a new car (almost 1yr old)
    What should I do to fix it?

  2. Avataaar/Circle Created with python_avatars Cailev Pangan says:

    The guys never gets old

  3. Avataaar/Circle Created with python_avatars AJ Wash says:

    Could be a broken rod, or a bad master switch, or common in GMs it gets stuck, or could be a low battery, or I’ve literally seen a rod cap get scratched and stop it from going down and locking

  4. Avataaar/Circle Created with python_avatars Derrick Durham says:

    Wish you were a good guy. Glad you made it in Life. @ChrisFix

  5. Avataaar/Circle Created with python_avatars WraithFPS says:

    Can you please do one where you teach us how to fix a broken motor for the window that won’t go down or up when pushing on the bottom even from the passenger side 😔

  6. Avataaar/Circle Created with python_avatars Ranjeet Joshi says:

    Toyota left the chat 🙃

  7. Avataaar/Circle Created with python_avatars Melancholic Smile says:

    I am sure i wont be able to putt it back in the way i took it out lol and end up with some spare screws after i put alltogether

  8. Avataaar/Circle Created with python_avatars Jakshee says:

    Another problem could be broken wire in the door grommet sleeve. After 10+ years the cable insulation can stiffen up and broke, leaving the naked wiring exposed, they can short to each other or just be broken after a while.

  9. Avataaar/Circle Created with python_avatars BuildmanEpic says:

    What do I do if I accidentally bend a rod

  10. Avataaar/Circle Created with python_avatars li cung says:

    Hi Chris, my Mazda 3, 2009, the power windows won't go up on passenger front and passenger back right if I press it from driver switch, what could go wrong? They can all go down no problem, just going up and only on 2 windows

  11. Avataaar/Circle Created with python_avatars Miguel Yanez says:

    That hummer has power locks??

  12. Avataaar/Circle Created with python_avatars __some_damn_person__ says:

    This is custom hummer?
    Because to me it looks like an old military Humvee that's been redone on the inside and outside.

  13. Avataaar/Circle Created with python_avatars Balistic 120 says:

    He sounds different I bet he sped the video up

  14. Avataaar/Circle Created with python_avatars Philip H. says:

    I still love this hummer. Something about the color and shape

  15. Avataaar/Circle Created with python_avatars Victor Perez says:

    Heyyy guys!

  16. Avataaar/Circle Created with python_avatars Eric Liu says:

    Hi Chris, my 08 Mazda 3 driver side actuator doesn't sense the lock knob. The cable is always jammed as long as the harness is connected. I changed the actuator and the problem stays. I can lock with the key from the outside, and the remote also works fine. Only the driver lock knob is jammed. Could it be an electrical issue?

  17. Avataaar/Circle Created with python_avatars missyd0g2 says:

    You need a SickFix… take care of yourself. Back to my muffler bearings and blinker fluid.

Leave a Reply to Balistic 120 Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.