This shows how to change out the Multifunction Switch on a PT Cruiser or Dodge Neon. The fog lights would stay on and drain the battery even in the off position... This replacement will work for any PT Cruiser. The multiswitch is a well know problem for Pt Cruisers but it can be easily fixed with no special tools. The job takes 30min if you take your time. I got the part for $60 so shop around. A job like this done at the dealer would cost anywhere from $200-$400.
Here is the part I used that will fit any 2001-2005 PT Cruiser: http://www.amazon.com/gp/product/B00BI3JJW8/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00BI3JJW8&linkCode=as2&tag=chri0e2-20&linkId=DZTENBJATNHX5KPE
Parasitic Draw Test: https://www.youtube.com/watch?v=n5FJDgcdii8
**If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday**
-Website: https://www.ChrisFixed.com
-Facebook: https://www.facebook.com/chrisfix8
-Twitter: https://twitter.com/ChrisFixed
-Instagram: https://instagram.com/chrisfixit
-Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7
-YouTube Channel: https://www.youtube.com/ChrisFix
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

12 thoughts on “How to change a multifunction switch in a pt cruiser and dodge neon”
  1. Avataaar/Circle Created with python_avatars Mark De Boer says:

    Just replaced fog light switch on my '02 PT. My original fix was to take the fog lights totally out of their sockets. But now after your simple step-by-step instructions, my fog lights now work too. EASY as you stated. Thank you!

  2. Avataaar/Circle Created with python_avatars Timothy Thomas says:

    Well done, Start to finish.

  3. Avataaar/Circle Created with python_avatars Jeff Williams says:

    my battery keeps draining new battery 2002 pt

  4. Avataaar/Circle Created with python_avatars Ninjawaffulz says:

    @chrisfix I needed this video since my low beams were not coming on, love your content.

  5. Avataaar/Circle Created with python_avatars mrratskins says:

    This video is excellent in showing closeup detail and providing explanations. I replaced one of these switches years ago on a different PT and watched another video that was not nearly as good as this one. Now I'm back to replacing this on my new/old PT GT. The only thing I would add is that while you are waiting to get the switch you should probably remove the fuse for the fog lights. That could save your battery.

  6. Avataaar/Circle Created with python_avatars Katherine Bonds says:

    Just bought the part and fixed my car in the parking lot of an Autozone with this video and $50!

  7. Avataaar/Circle Created with python_avatars kathy hampton says:

    Thanks for your help, very simple job

  8. Avataaar/Circle Created with python_avatars Chris TheLongPush says:

    Thanks. I need to swap mine.

  9. Avataaar/Circle Created with python_avatars Reba Anthony says:

    How to change door mirrors

  10. Avataaar/Circle Created with python_avatars Benjamin West says:

    Alright guys! I changed mine out with a junk yard variant. Victory! Praise the Lord Jesus. I am not certain on the battery issue, but the headlights are remarkably brighter. Time will prove the battery issue's success. Thank you sir for the geat video.

  11. Avataaar/Circle Created with python_avatars nwcheer32198 says:

    Question, why do u have to take off the negative battery terminal?

  12. Avataaar/Circle Created with python_avatars nwcheer32198 says:

    Thank you so much!!!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.