Surplus electronic parts :
Stock and Crypto AI Prediction :

Learn how to repair and remove dents from your car. When you can't do PDR, properly using a high quality body filler is the next best thing to remove dents. In this video, I show you how to sand the dents down to bare metal, add the body filler, add the glazing putty, spray paint the car at home, and then wet sand, compound, and polish, to make it come out amazing!
Pro Grade Body Filler:
Pro Grade Glazing Putty:
Sanding Block:
Sandpaper assortment:
Tack Cloth:
2K Clear Coat:
Full Face Respirator:
Respirator Filter:
Compound PC1:
Polish PC2:
Finishing Polish PC3:
Polishing Pads:
DA Polisher:
→ As an Amazon Associate I earn from qualifying purchases.
→ Become a ChrisFix Subscriber:
→ Instagram:
→ Facebook:
→ Website:
→ My Channel Home Page:
**If the video was helpful, remember to give it a "thumbs up" and consider subscribing.**
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

13 thoughts on “How to repair and remove dents from your car diy”
  1. Avataaar/Circle Created with python_avatars Sanadd Tayeh says:

    I literally leaned everything about cars from Chrisfix keep it up

  2. Avataaar/Circle Created with python_avatars naress123 says:

    Chris, you're a great mechanic but a horrible body detailer. PDR is not about glue pulling only and this method doesn't work for the job at hand. All you need is to get push rods behind the dents to push them up and then apply the finishing touches by hammering raised spots down. This procedure does not save the paint as it is already cracked but hot air can help prevent further damage as you push the dents. A professional body painter can then fill the cracks with thick paint for a perfect indistinguishable look.

  3. Avataaar/Circle Created with python_avatars F S says:

    What is glazing putty called in Slovakia? I'm from there and don't know 🙁

  4. Avataaar/Circle Created with python_avatars the definition of gamer says:

    Chris can you remove the dent from my heart?

  5. Avataaar/Circle Created with python_avatars DEADBEEF says:

    I think I am gonna keep my dents, thanks anyway

  6. Avataaar/Circle Created with python_avatars Fito King says:

    It went from bad to worse to perfection all in 1 video 👍

  7. Avataaar/Circle Created with python_avatars Thicc Ricc says:

    Do you edit your own videos or do you have an editor? Really awesome videos!

  8. Avataaar/Circle Created with python_avatars tristan f says:

    When is next mustang vid or del sol vid

  9. Avataaar/Circle Created with python_avatars robert 2but says:

    It must be nice to have a dream and be successful at it good for you buddy I have only watched maybe 10 vids from you over the last 2 or 3 yes but you never disappoint hope you get everything you deserve

  10. Avataaar/Circle Created with python_avatars Kingslayer_kev says:

    I kid you not I just got a dent on my beautiful civic type r cuz I bumped into my gas lid and it pushed into the car

  11. Avataaar/Circle Created with python_avatars 💞Sanny Т@p т0 Ch̴a̴t̴ ̴ ME 💞 says:

    This man don’t miss. Just when you think he has covered everything, he finds something you have been wanting to do or something probably forgot about. Well done sir!!

  12. Avataaar/Circle Created with python_avatars BlackJack says:

    And after slamming the door a few times, it looks the same as before because everything has flaked off. Or because of temperature fluctuations. 🤣🤣🤣

  13. Avataaar/Circle Created with python_avatars Evie Wren says:

    You're wonderful.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.