Learn how to replace a front push bar aka brush guard on your truck or suv. In this case we are working on a Hummer H3 but the process is the same, if not similar for most brush guard installs.
The trick here for installing this brush guard so you don’t have to remove the bumper is to spin the d-ring so you unscrew it from the bumper without having a wrench holding the bolt behind the bumper. Otherwise the instructions say to remove the front bumper and that’s extra work.
ChrisFix Extendable Ratchets: https://bit.ly/ChrisFixRatchets
The trick here for installing this brush guard so you don’t have to remove the bumper is to spin the d-ring so you unscrew it from the bumper without having a wrench holding the bolt behind the bumper. Otherwise the instructions say to remove the front bumper and that’s extra work.
ChrisFix Extendable Ratchets: https://bit.ly/ChrisFixRatchets
Hey guys! Chris Fix here! My friend just picked up a really nice Hummer H3 It's a 2006 but it had really bad belt noise so I replaced the belt for him. But as a surprise I'm also gonna add a front push bar and this is gonna be really simple. We have all the Fasteners and mounts and our tools all common hand tools and the first thing we need to do is to get these D-rings off so we could sandwich our mounts in here. So let's unscrew this bolt going through the d-ring then we can remove it the rest of the way by hand, then unscrew the two bolts holding on the d-ring mount, and then spin the mount to remove the hidden bolt.
that way we don't have to remove the entire front bumper. Then we can install the plate that the brush guard will Mount to and torque that down and then torque down the d-ring bolt. And next we could add the brush guard and this is held in with four bolts, two bolts on each side. so get the washers and nuts on there and torque them down to spec.
and the last thing to do is to add the headlight protection and torque down both of these bolts and check it out. Now this looks like a real Hummer Beautiful.
Chris can u help me with 2018 jeep wrangler death wobbles
Would you make a full video about hummer?
Almost 10 million brother 💪🏼
My friends won't even text back, and here you are upgrading his ride.
you don't have to tighten them to spec
tight is tight
More content on the H3 please 🙏🏼
whens the next update on the lemons racer?
"torque to spec"…..so is that all my body weight or like….quarter??
Worst motor an transfer case Chevy has ever made 🥴
Hey Chris I own one of those suckers they are really bad cars because number 5 cylinder always goes out and you would need a new cylinder head you should have bought the 3rd generation
How do you get the torque spec at 45 degree is there a formula?
H3 bro 🤮
That not a nice car it so big and ugly yuck eww shit
". . . Beautiful"
And then forget to replace belt
Jk sir
Those welds are shit